Multi-functional Battery Crimping,Cutting and punching Tool ED-60UNV for 16-300mm² Cu and Al Cable
Model:ED-60UNV
Brand: iGeelee
Model:ED-60UNV
Brand: iGeelee
ED-60UNV is a multi-functional tool,battery crimping,cutting and punching in one single tool.
| Model | ED-60UNV |
|---|---|
| Crimping Force | 60KN |
| Stroke | 42mm |
| Crimping Range | 16-300mm² |
| Cutting Cycle | 70 times |
| Cutting Range | Φ40mm(Cu/Al and armored cable) |
| Crimping Cycle | 320 times |
| Punching Cycle | 100 times |
| Punching Range | Φ22.5-Φ61.5 |
| Round punch Max. | 61.5mm |
| Battery voltage | 18V |
| Battery capacity | 3.0 Ah |
| Charging time | 2hours |
| Package | Plastic case |
| Accessories | |
| Crimping Dies | 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm² |
| Punches&die(Type C) | 22.5, 28.3, 34.6, 43.2, 49.6, 61.5mm |
| Blade | 1 set |
| Adapter for crimping | 1 pc |
| Adapter for punching | 1 pc |
| 3/4″, 16UN Draw Stud | 1 pc |
| 7/16, 20UN Draw Stud | 1 pc |
| Spacer | 1 pc |
| Battery | 2 pcs |
| Charger | 1 pc |
| Sealing ring of cylinder | 1set |
| Sealing ring safety valve | 1set |
ED-60UNV multifunction power tool with battery, crimping dies of 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm², punches dies of 22.5, 28.3, 34.6, 43.2, 49.6, 61.5mm², for Cu compression cable lugs and compression joints 16-300mm², Al compression cable lugs and compression joints 10-240mm², Blade for φ40mm Cu/Al cable and Armored Cu/Al cable, round punches for φ22.5-61.5mm in the 3.5nn middle steel
1. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
2. The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
3. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston& die when the button is pressed.
4. The crimping head can be smoothly turned by 360 degrees around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non-operation the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6. If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.