Mini battery electric power cable crimping tool ED-400 range 16-400mm²
|Crimps per charge
||120 times( Cu 150mm²)
||6s-18s(depend on the size of cable)
|Sealing ring of cylinder
|Sealing ring safety valve
||16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm²
The microcomputer control system automatically detects the pressure when it is crimping, with double safety protect.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfers to high pressure automatically by slow crimping.
If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half losing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
All tools can be controlled by one key-press the trigger to start working, half losing the trigger means stop forcing pressure, loosing fully means piston return to the original position.