Battery terminal hexagon crimping tool BZ-400U for CU/AL
|Crimps per charge
||150 times (Cu 150mm² )
||4s-12s (depends on the size of cable)
||16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm²
|Sealing ring of cylinder
|Sealing ring safety valve
Battery powered crimping tool 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm²
The microcomputer control system automatically detects the pressure when it is crimping, with double safety protect.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfers to high pressure automatically by slow crimping.
If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half losing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.