Min power battery hydraulic crimping tools BZ-300B crimp for 16-300mm²
|Crimps per charge
||300 times( Cu 150mm²)
|Sealing ring of cylinder
|Sealing ring safety valve
||16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm²
1. All tools can be controlled by one key-press the trigger to start working, half losing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
2. LCD data display-the total crimping times, electricity power, errors info can be checked by the Display, also we can special making for the customer to show the pressure if necessary.
3. Air Cooling heat dissipation system to extend use.
4. Heads rotate 350 degrees in order to gain better access to tight corners or other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non-operation the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion
7. USD connect to memory crimping time