Battery hydraulic Cu/Al cable cutting tool BZ-45 max.45mm
|Cutting range||Φ45mm (Cu/Al cable and armored cable)|
|Crimping cycle||70 times|
|Battery capacity||3.0 Ah|
|Charging time||2 hours|
|Sealing ring of cylinder||1set|
|Sealing ring safety valve||1set|
BZ Series Electro cable cutting tools with battery powered for cutting Cu/Al and armored cable, which charging time for 2hours
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.