Mini Battery Axial Pressing Tool PZ-1240 for 12-40mm
|Connecting/ charge||320 times|
|Battery capacity||3.0 Ah|
|Voltage Available||100-240V AC|
|Sealing ring of cylinder||1set|
|Sealing ring safety valve||1set|
Axial Pressing Tool PZ-1240 for Rehau system with clamping range 16mm, 20mm, 25mm, 32mm
Pressure released automatically Function-the tool stop forcing the pressing and release 90% pressure when the pressure reached the maximum.
The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfers to high pressure automatically by slow crimping.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
One key control-press the trigger to start working, half losing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
The microcomputer control system automatically detects the pressure when it is crimping, with double safety protect.