HOME > PRODUCTS > Mini Battery Electric Pipe Crimping Tool PZ-1930 for copper stainless steel pex pipe


Mini Battery Electric Pipe Crimping Tool PZ-1930 for copper stainless steel pex pipe


Brand: iGeelee


Mini battery electric pipe crimping tool PZ-1930 for copper stainless steel Pex pipe



Model PZ-1930
Rated crimping force  24KN
Rated working pressure  50Mpa
Piston stroke 35mm
Application Copper, Stainless Steel Multilayer composite Pipe, Pex Pipe
Clamping cycle  3S-8s
Working temperature   -10℃~40℃
Battery  18V 3.0Ah Li-ion
Charger 100~240V, AC50~60Hz
Charging time 2Hours
Battery 2pcs
Charger 1pc
Sealing ring of safety valve 1
 Clamp die specification for thin-wall stainless steel pipe, copper pipe(nominal outer diameter) SV type:15, 18, 22, 28mm
Clamp die specification for XPAP TH type:16,20,26,32mm

U type:16,20,25,32mm

Clamp die specification for PEX 15(3/8″), 18(1/2″), 20(5/8″), 24(3/4″), 30(1″)



PZ-1930 crimping tool for crimping Pex pipe, Copper, stainless steel, Multi-layer composite Pipe from 16mm to 28mm


1. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.


2. The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.


3. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston& die when the button is pressed.


4. The crimping head can be smoothly turned by 360 degrees around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.


5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non-operation the tool is always ready to operate. In addition, we see a lower power-weight ratio with
50% more capacity and shorter charging cycles compare to NiMH batteries.


6. If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.