HOME > PRODUCTS > Wire Installation Tools > Battery Cable Tools > Mini Battery Cable Cutter EZ-20 for Al armored ASCR steel wire

                 

Mini Battery Cable Cutter EZ-20 for Al armored ASCR steel wire

Model:EZ-20

Brand: iGeelee

CONTACT US

Mini battery cable cutter EZ-20 for Al armored ASCR steel wire

 

 

Model EZ-20
Length 116*75*382
Weight of tool  2.90kg
Rated power 52Mpa
Max.output 50KN
Cutting/Charge 300times
Mild iron rod 13mm
Rebar 13mm
Copper stranded wire 20mm
Aluminum wire 20mm
Armored cable 20mm
ASCR 21mm
Steel wire 20mm
Voltage of battery 18V DC Li-ion
Capacity  3Ah
Voltage 100-240V AC
Charging time 2hours
                     Accessories
Battery 2pcs
Charger 1pc
Sealing ring of cylinder 1set
Sealing ring safety valve 1set

 

 

Features

The microcomputer control system automatically detects the pressure when it is crimping, with double safety protect.

 

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

 

The tool equipped with a double piston pump which characterized by a fast approach towards the connecting material and transfers to high pressure automatically by slow crimping.

 

The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

 

If a deviation from the set operating pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.

 

All tools can be controlled by one trigger. This results in easy handling and a better grip compared to a two button operation.

 

Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

 

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.