Hydraulic Hose Crimper Tool Kit IG-71500 for Barbed and Beaded Hose Fittings
Model:IG-71500
Brand: iGeelee
Model:IG-71500
Brand: iGeelee
Check IG-71500 hose crimper tool data below:
Model | IG-71500 |
---|---|
71500 – 001 | Hydra – flare assembly |
71500 – 8 | Die Set – #8 (13/32″) |
M71500 – 10 | Die Set – #10 (1/2″) |
M71500 – 12 | Die Set – #12 (5/8″) |
71500 – 6SRB | Die Set – #6 (5/16″ Reduced Barrier) |
71500 – 8SRB | Die Set – #8 Reduced Barrier (13/32) |
71500 – 10SRB | Die Set – #10 (1/2″ Reduced Barrier) |
71500 – 12SRB | Die Set – #12 (5/8″ Reduced Barrier) |
71500 – PB | Die Set Plastic Box |
1. Remove pin and lose the handle till you can “Open” top yoke.
2. Select correct die set (refer to the back page for description )
3. Insert the die into the joke.
4. Position fitting and hose in the crimper and close the yoke.
5. Insert pin securely.
6. Turn Body of tool clockwise until dies are snug against hose fitting.
7. Turn the hydraulic valve to “closed “position.
8. Pump handle to crimp fitting onto hose continues pumping until handle comes to a stop.
9. Once crimp is complete, turn the hydraulic valve to OPEN position.
The new Patent pending “HYDRA – KRIMP” makes crimping barbed and beaded fittings as easy as 1 – 2 – 3!
The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications.
The Hydra- Krimp can be used on both beaded and barbed hose fittings.
The kit comes with a complete set of dies covering hose sizes #8, #10, #12 and reduced barrier #6, #8, #10 and #12.
The dies snap quickly into the press fixture requiring no pins or screws. The kit comes in a custom molded case and includes