Battery Armored Cable Cutter ED-85 for max die 85mm
Model:ED-85
Brand: iGeelee
| Model | ED-85 |
|---|---|
| Cutting Force | 60KN |
| Stroke | 86mm |
| Cutting range | Φ85mm (Cu/Al cable and armored cable) |
| Crimping cycle | 70 times |
| Battery voltage | 18V |
| Battery capacity | 3.0 Ah |
| Charging time | 2 hours |
| Package | Plastic box |
| Accessories | |
| Blade | 1pc |
| Battery | 2pcs |
| Charger | 1pc |
| Sealing ring of cylinder | 1set |
| Sealing ring safety valve | 1set |
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston & die when the trigger is released.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.