HOME > PRODUCTS > Wire Installation Tools > Battery Cable Tools > Battery Cable Cutter EZ-45

                 

Battery Cable Cutter EZ-45

Model:EZ-45

Brand: iGeelee

CONTACT US

Battery Cable Cutter EZ-45 for Cutting Metal

 

iGeelee Battery Cable Cutter EZ-45 is  suitable for cutting Cu/Al  and armored cable.

ModelEZ-45
Cutting Force60KN
Stroke50mm
Cutting rangeΦ45mm (Cu/Al cable and armored cable)
Crimping cycle70 times
Battery voltage18V
Battery capacity3.0 Ah
Charging time2 hours
PackagePlastic box
      Accessories
Blade1pc
Battery2pcs
Charger1pc
Sealing ring of cylinder1set
Sealing ring safety valve1set

 

The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston & die when the trigger is released.

The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.

Battery cable cutter EZ-45 for cutting CuAl and armored cable (6)

A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.